Enter your keyword

Mech Laboratories

SNo Lab Name Equipments
1 Manufacturing Technology Laboratory – I 1 Centre Lathes 7 Nos.

2 Horizontal Milling Machine 1 No

3 Vertical Milling Machine 1 No

4 Shaper 1 Nos.

2 Fluid Mechanics and Machinery Laboratory 1 Orifice meter setup 1

2 Venturi meter setup 1

3 Rotameter setup 1

4 Pipe Flow analysis setup 1

5 Centrifugal pump/submergible pump setup 1

6 Reciprocating pump setup 1

7 Gear pump setup 1

8 Pelton wheel setup 1

9 Francis turbine setup 1

10 Kaplan turbine setup 1

3 Electrical Engineering Laboratory 1 DC Shunt motor 2

2 DC Series motor 1

3 DC shunt motor-DC Shunt Generator set 1

4 DC Shunt motor-DC Series Generator set 1

5 Single phase transformer 2

6 Three phase alternator 2

7 Three phase synchronous motor 1

8 Three phase Squirrel cage Induction motor 1

9 Three phase Slip ring Induction motor 1

10 Single phase Induction motor 1

4 Manufacturing Technology Laboratory–II 1 Turret and Capstan Lathes 1 No each

2 Horizontal Milling Machine 2 No

3 Vertical Milling Machine 1 No

4 Surface Grinding Machine 1 No.

5 Cylinderical Grinding Machine 1 No.

6 Radial Drilling Machine 1 No.

7 lathe Tool Dynamometer 1 No

8 Milling Tool Dynamometer 1 No

9 Gear Hobbing Machine 1 No

10 Tool Makers Microscope 1 No

11 CNC Lathe 1 No

12 CNC Milling machine 1 No

13 Gear Shaping machine 1 No

14 Centerless grinding machine 1 No

15 Tool and cutter grinder 1 No

5 Thermal Engineering Laboratory – I 1 I.C Engine – 2 stroke and 4 stroke model 1 set

2 Apparatus for Flash and Fire Point 1 No.

3 4-stroke Diesel Engine with mechanical loading. 1 No

4 4-stroke Diesel Engine with hydraulic loading. 1 No.

5 4-stroke Diesel Engine with electrical loading. 1 No.

6 Multi-cylinder Petrol Engine 1 No.

7 Single cylinder Petrol Engine 1 No.

8 Data Acquisition system with any one of the above engines 1 No.

9 Steam Boiler with turbine setup 1 No.

6 Strength of Materials Laboratory 1 Universal Tensile Testing machine with double 1 shear attachment – 40 Ton Capacity 1

2 Torsion Testing Machine (60 NM Capacity) 1

3 Impact Testing Machine (300 J Capacity) 1

4 Brinell Hardness Testing Machine 1

5 Rockwell Hardness Testing Machine 1

6 Spring Testing Machine for tensile and compressive loads (2500 N) 1

7 Metallurgical Microscopes 3

8 Muffle Furnace (800 C) 1

7 Dynamics Laboratory 1 Cam follower setup. 1 No.

2 Motorised gyroscope. 1 No.

3 Governor apparatus – Watt, Porter, Proell and Hartnell governors. 1 No.

4 Whirling of shaft apparatus. 1 No.

5 Dynamic balancing machine. 1 No.

6 Two rotor vibration setup. 1 No.

7 Spring mass vibration system. 1 No.

8 Torsional Vibration of single rotor system setup. 1 No.

9 Gear Models 1 No.

10 Kinematic Models to study various mechanisms. 1 No.

11 Turn table apparatus. 1 No.

12 Transverse vibration setup of

a) cantilever

b) Free-Free beam

c) Simply supported beam.

8 Thermal Engineering Laboratory-II 1 Guarded plate apparatus 1 No.

2 Lagged pipe apparatus 1 No.

3 Natural convection-vertical cylinder apparatus 1 No.

4 Forced convection inside tube apparatus 1 No.

5 Composite wall apparatus 1 No.

6 Thermal conductivity of insulating powder apparatus 1 No.

7 Pin-fin apparatus 1 No.

8 Stefan-Boltzmann apparatus 1 No.

9 Emissivity measurement apparatus 1 No.

10 Parallel/counter flow heat exchanger apparatus 1 No.

11 Single/two stage reciprocating air compressor 1 No.

12 Refrigeration test rig 1 No.

13 Air-conditioning test rig 1 No.

9 Metrology and Measurements Laboratory 1 Micrometer 5

2 Vernier Caliper 5

3 Vernier Height Gauge 2

4 Vernier depth Gauge 2

5 Slip Gauge Set 1

6 Gear Tooth Vernier 1

7 Sine Bar 1

8 Floating Carriage Micrometer 1

9 Profile Projector / Tool Makers Microscope 1

10 Parallel / counter flow heat exchanger apparatus 1

11 Mechanical / Electrical / Pneumatic Comparator 1

12 Autocollimator 1

13 Temperature Measuring Setup 1

14 Force Measuring Setup 1

15 Torque Measuring Setup 1

16 Coordinate measuring machine 1

17 Surface finish measuring equipment 1

18 Bore gauge 1

19 Telescope gauge 1

10 C.A.D. / C.A.M. Laboratory HARDWARE

1. Computer Server 1

2. Computer nodes or systems (High end CPU with atleast 1

GB main memory) networked to the server 30

3. A3 size plotter 1

4. Laser Printer 1

5. CNC Lathe 1

6. CNC milling machine 1

 

SOFTWARE

7. Any High end integrated modeling and manufacturing CAD

/ CAM software 15 licenses

8.

CAM Software for machining centre and turning centre

(CNC Programming and tool path simulation for FANUC /

Sinumeric and Heidenhain controller)

15 licenses

9. Licensed operating system Adequate

10. Support for CAPP Adequate

11 Design and Fabrication Project GUIDELINES FOR REVIEW AND EVALUATION

The students may be grouped into 2 to 4 and work under a project supervisor. The device/

system/component(s) to be fabricated may be decided in consultation with the supervisor and if

possible with an industry. A project report to be submitted by the group and the fabricated model,

which will be reviewed and evaluated for internal assessment by a Committee constituted by the

Head of the Department. At the end of the semester examination the project work is evaluated based on oral presentation and the project report jointly by external and internal examiners constituted by the Head of the Department.

12 Communication Skills – Laboratory Based PIV system,1 GB RAM / 40 GB HDD,OS: Win 2000 server,Audio card with headphones (with mike),JRE 1.3, Interactive Teacher Control Software, English Language Lab Software, Career Lab software, Handicam Video Camera (with video lightsand mic input),Television – 29, Collar mike, Cordless mikes, Audio Mixer, DVD Recorder / Player, LCD Projector with MP3 /CD /DVD provision for audio / video facility
14 Simulation and Analysis Laboratory 1 Computer Work Station 15

2 Color Desk Jet Printer 01

3 Multibody Dynamic Software Suitable for Mechanism

simulation and analysis

15 licenses 4 C / MATLAB 5 licenses

15 Mechatronics Laboratory 1 Basic Pneumatic Trainer Kit with manual and electrical

controls/ PLC Control each

1 No.

2 Basic Hydraulic Trainer Kit 1 No

3 Hydraulics and Pneumatics Systems Simulation Software 10 No 4                           8051 – Microcontroller kit with stepper motor and drive circuit sets

2 No Image processing system with hardware & software 1 No.

16 Comprehension METHOD OF EVALUATION:

The students will be assessed 100% internally through weekly test with objective type questions

on all the subject related topics